Capacity
Cutting width: 46 in
Speed forward min: 0 mph
Speed forward max: 6.5 mph
Emission
Exhaust emissions (CO₂ EU V)2: 792 g/kWh
Cutting Deck
Cutting methods: Collect/Mulch/Side discharge
Deck thickness: 13 gauge
Deck Wash Port: Yes
Greasable mandrels: Yes
Nose roller: Yes
Powder-coated cutting deck: Yes
Spindle/mandrel type: Cast Aluminum
Deck lifting system: Manual, hand operated
Cutting height steps: 6
Cutting deck type: Stamped vented deck system
Anti-scalp wheels: 3
Blade engagement: Electric clutch
Blades: 2 pcs
Cutting deck material: Steel
Cutting height, min (approximate): 1.5 in
Cutting height, max (approximate): 4 in
Dimensions
Weight: 535 lbs
Base machine, height (ROPS down): 40 in
Base machine, height (ROPS up): 40 in
Base machine, height: 40 in
Base machine, length: 75 in
Base machine, width (chute down): 56.5 in
Base machine, width (chute up): 48 in
Drive System
Transmission manufacturer: Hydro-Gear
Transmission type: Hydrostatic
Engine
Engine name: FR Series
Engine Power (As rated by the engine manufacturer)1: 21.5 hp
Cylinder displacement: 44.3 cu.inch
Air filter type: Paper
Cylinders: 2
Engine cooling: Air
Engine lubrication type: Full pressure
Fuel tank location: Side (Single)
Fuel tank volume (with reserve): 3.5 gal (US)
Motor/engine manufacturer: Kawasaki
Oil filter: Yes
Equipment
Seat type: 15″ high back
Cup holder: Yes
Hinged armrests: Optional
Hour meter type: Digital with pre-programmed service intervals
ROPS: No
Seat back height: Medium
Seat material: Vinyl
Control
Connectivity: Not applicable
